编程论坛 » Linux » [求助]我装linux时提示........

danielliujp 发表于 2006-12-1 14:45

[求助]我装linux时提示........

<P>LOADLIN v1.6c (C) 1994..2002 Hans Lermen &lt;<a href="mailto:lermen@fgan.de" target="_blank" >lermen@fgan.de</A>&gt;</P>
<P>CPU is in V86-mode (may be WINDOWS, EMM386, QEMM, 386MAX, ...)<BR>You need pure 386/486 real mode or a VCPI server to boot Linux<BR>VCPI is supported by most EMS drivers (if EMS is enabled),<BR>but never under WINDOWS-3.1 or WINDOWS'95.<BR>(However, real DOS-Mode of WINDOWS'95 can have EMS driver with VCPI)<BR>If loading via VCPI you also MUST have:<BR>  1. An interceptable setup-code (see MANUAL.TXT)<BR>  2. Identical Physical-to-Virtual mapping for the first 640 Kbytes</P>
<P>Your current DOS/CPU configuration is:<BR>  load buffer size: 0x00000000     , setup buffer size:  0x3E00<BR>  total memory:     0x00100000<BR>  CPU is in V86 mode<BR>  SetupIntercept: NO<BR>  stat2: cpu_V86, but no VCPI available (check aborted)<BR>  input params (size 0x0046):<BR>    autoboot\vmlinuz initrd=autoboot\initrd.img ramdisk_size=9216<BR>  LOADLIN started from DOS-prompt<BR>WARNING: Not enough free memory (load buffer size)<BR>F:\linux\dosutils&gt;<BR></P>
<P>我先用纯DOS环境下装,一直没反映,这是我用WIN-XP下命令提示符看到的,大家帮我看看吧,谢了</P>

求知之声 发表于 2006-12-8 19:36

          你的硬件可能不兼容！！<br>

走刀口→超 发表于 2006-12-9 14:18

没有使用超级DOS吧.呵呵...要该启动盘

柒鹰旅 发表于 2006-12-10 14:49

WARNING: Not enough free memory (load buffer size)

查看完整版本: [求助]我装linux时提示........